Wavecor 6 inch neodymium die cast car mid/woofer
Prices from

1 piece EUR 139.01

3 pieces EUR 133.66

Prices are in Euro and VAT excluded


Out of stock, we order this product for you from our supplier, we expect a delivery time approximately four weeks

Read the delivery time information

Pieces per package 1
Minimum order 1 piece
General description

WF166TU01 is a mid/woofer designed for demanding bass and midrange applications. It works equally well for most applications but is designed especially for automotive high-end sound. The very rigid die cast alu chassis follows the common standard dimensions for easy installation in cars
WF166TU01 is powered by a dual neodymium magnet structure that ensures good efficiency and optimized T/S parameters.
The large 32mm voice coil and the special heat sink ensure high power handling - thermally and mechanically
The optimized paper cone ensures wide bandwidth and low distortion. Distortion is further reduced by efficient venting of chassis and voice coil.
WF166TU01 is an obvious choice for 2-way high-end car speaker systems.

* Heat sink for increased heat transfer obtaining high long-term power handling
* Vented voice coil former for reduced distortion and compression
* Vented chassis for lower air flow speed reducing audible distortion
* Heavy-duty black fiber glass voice coil bobbin to increase power handling and reduce mechanical losses resulting in better dynamic performance and low-level details
* Large motor system with 1 voice coil diameter and dual neodymium magnet for better control and efficiency
* Long linear stroke motor for reduced distortion at high levels
* Linear suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions
* Gold plated terminals to prevent oxidation for long-term reliable connection - important in a car environment

Nominal size 6 [inch.]
Nominal impedance 4 [ohm]
Recommended upper frequency limit 3.5 [kHz]
Sensitivity, 2.83V/1m, (average 200-2,000Hz) 91.5[dB]
Voice coil diameter 32.5[mm]
Voice coil height 11 [mm]
Air gap height 4.0[mm]
Voice coil resistance, RDC 3.2 [ohm]
Voice coil inductance 0.16 [mH]
Magnet weight (dual neodymium) 102[g]
Effective radiating area, Sd 139[]
Power handling, continuous, IEC 268-5 60[W]
Resonance freq., Fs 50[Hz]
Moving mass, incl. air 12.5 [g]
Force factor, Bxl 5.2 [Tm]
Mechanical Q, Qm 11 -
Electrical Q, Qe 0.47 -
Total Q, Qt 0.45 -
Suspension compliance, Cms 0.85[mm/N]
Equiv. air volume, Vas 23.2[lit.]
Total unit net weight 0.71 [kg]

Product data